Ethernet Interface
The LMA200PM is equipped with a port
for connection to an Ethernet network.
This enables remote operation in a
browser window, over a local network
or the Internet.
Configure the following settings for
remote operation:
– Device name
– Use DHCP*
– IP address
– Subnet mask
– Standard gateway
– Remote access for VNC client**
*The dynamic host configuration
protocol (DHCP) server automatically
allocates IP addresses.
**Virtual network computing (VNC) is
a software package for remote desktop
display. The VNC Server software runs
on the remote computer, enabling the
local computer – running VNC Viewer
software – to view and operate the
remote desktop. This lets you use the
remote computer as though you were
seated directly in front of it.
If DHCP is not used, the IP address
of the moisture analyzer should be as
similar as possible to that of the local
computer, for example:
– IP address of computer: 192.168.178.20
– IP address of LMA200PM:
192.168.178.21
The settings for subnet mask and
standard gateway should be the same
as those in the local computer.
These settings are configured in the
Windows® operating system under:
Start > Control Panel > Network and
Dial-up Connections > <name of the
active network connection> > Support
Saving Data
Storing Parameter Settings
The most recent configurations of Setup
menu parameters are active when you
switch on the moisture analyzer.
You also have the option of restoring
the factory settings (see “Security
Management” in the chapter entitled
“Configuration”).
Saving the Settings
The function for saving data may be
accessible to all or password-protected:
– Accessible: Any operator can save data
without entering a PIN.
– Password-protected: A user name must
be selected and the associated PIN must
be entered.
The user account (user name and PIN)
is set up by the administrator and
assigned to one of three groups:
– Administrator
– Supervisor
– Operator
See the chapter entitled “Configuration”
for details on user privileges.
32
Summary of Contents for LMA200PM
Page 37: ...37 All dimensions given in mm Dimensions Scale Drawings...
Page 38: ...38...
