Sartorius stedim BioWelder, Operation Manual

Page: 14 / 24

14
7. 7. 7. 7. Printer Printer Printer Printer
7.1
7.1 7.1
7.1 Accessories
Accessories Accessories
Accessories
– Power supply cable
– Connecting cable to BioWelder®
– Citizen CBM 910
– 2 paper rolls
– 2 ink ribbon
– Manual Citizen
For more information, please check the user’s manual of the Citizen Dot Matrix
Printer Model CBM 910, which is included in the delivery.
7.2 7.2 7.2 7.2 Printout Printout Printout Printout
If a printer is connected a printout is produced after each welding. This includes
the serial number of the device, hose type, size, depyrogenation temperature,
welding temperature, welding time, and the date and time.
7.3
7.3 7.3
7.3 Printing of last 10 welding protocols
Printing of last 10 welding protocols Printing of last 10 welding protocols
Printing of last 10 welding protocols
Connect printer to the BioWelder® as shown in picture on the left. To print the
last 10 welding protocols open the “printing” menu on the display. Press MODE
and afterwards the right arrow. Enter password “264” with the up and down arrow.
With right arrow change decimal place (check also page 7: Choose language).
Confirm password with right arrow. Press right arrow once and you reach the
“printing” menu. When you press the down arrow printing will be started.
Your BioWelder® is ready now for the next welding.