17
1.
Align
C
(wheel stop) with holes in mounting tubes
on the right side of the mounting tube. Install stop
tube using
N
(3/8 x 4.0” bolt) with
W
(washer) and
T
(3/8 lock nut) as shown above.
2.
Tighten to 15 ft/lbs (20 Nm) max. (Do not
overtighten or tube could be crushed while
installing.)
1. Align
C
(wheel stop) with holes in mounting tubes on the right side of
the mounting tube. Install stop tube using
N
(3/8 x 4.0” bolt) with
W
(washer) and
T
(3/8 lock nut) as shown above.
2. Tighten to 15 ft/lbs (20 Nm) max. (Do not overtighten or tube could be
crushed while installing.)
Wheel Stop Installation
