1.
Install
M
(mounting plates) using
P
(M10 x 30mm carriage bolts),
S
(M10 nylock nuts) and
W
(washers).
2.
With all mounting plates installed tighten bolts evenly to 30 ft/lbs
(41 Nm) min
3.
Install
AA
(cross beam end plug) in either end of upper cross
beam
1. Install
M
(mounting plates) using
P
(M10 x 30mm car-
riage bolts),
S
(M10 nylock nuts) and
W
(washers).
2. With all mounting plates installed tighten bolts evenly
to 30 ft/lbs (41 Nm) min
3. Install
AA
(cross beam end plug) in either end of upper
cross beam
10
