15
1.
Place
G
(lower stall with riser) and
J
(lower mounting
bracket) into the first bike position working from left to
right.
2.
Install
R
(M8 x 16mm carriage bolts) with
X
(washers) and
U
(M8 locknuts). Tighten to 8 ft/lbs (11 Nm)
3.
Repeat the process with
H
(lower stall without riser).
4.
Space stalls per figure 2.
5.
Once lower stalls have been installed tighten lower
crossbeam nuts on mounting studs, tighten to 10 ft/lbs
(14 Nm).
1. Place
G
(lower stall with riser) and
J
(lower mounting
bracket) into the fi rst bike position working from left to
right.
2. Install
R
(M8 x 16mm carriage bolts) with
X
(washers)
and
U
(M8 locknuts). Tighten to 8 ft/lbs (11 Nm)
3. Repeat the process with
H
(lower stall without riser).
4. Space stalls per fi gure 2.
5. Once lower stalls have been installed tighten lower
crossbeam nuts on mounting studs, tighten to 10 ft/lbs
(14 Nm).
Lower Stall Installation
