Saramonic UwMic10, User Manual

Page: 22 / 28

/ 20
②
Manually setting the transmitter channel (Only available
on the UwMic10-TX10).
• Turn on the transmitter by long pressing the power button.
• Use the + or – button to display the channel setting menu
on the transmitter.
• Long press the SET button to select the menu.
• Use the + or – button to select the same channel as the
receiver and confirm it by short pressing the SET button.
6
Attach the accessories you need for the receiver and
transmitter. Refer to "Attaching Accessories" (page 4 and
page 10).
7
You are ready to record.
Specification
Receiver RX10
Channel number 96
Channel group A and B
Oscillator type PLL synthesizer
Audio output connector 3.5 mm mini jack
Antenna 1/4λ wire antenna
Audio output level –60 dBV
Headphone output level 30mW (16 Ω)
Receive frequencies 614 MHz - 696 MHz
Receive sensitivity -95 dBm
Signal to noise ratio 70 dB or more
Voice delay 12 ms
Reference deviation ±5 kHz (–60 dBV, 1 kHz input)
Frequency response 40 Hz to 18 kHz (+/-3dB)
Distortion 0.5% or less