Saramonic UwMic10, User Manual

Page: 5 / 28

/ 3
① Antennas
② Power button
Press to turn on or off the RX10.
③ SET button
Long press the SET button to enter the displayed menu.
Then, short press the SET button to confirm your option or
long press again to exit without saving.
④ POWER indicator
Indicates the battery level as follows:
Green light: Sufficient battery level.
Red light: Low battery level.
⑤ RF indicator and infrared transmitter port
The infrared transmitter port sends the set frequency to a
transmitter.
RF indicator displays the RF input level as follows:
Green light: RF signal is strong.
Red light: RF signal is weak or disconnected.
⑥ + or – button
Selects functions or values shown on the display.
⑦
LCD display
Display menus, please refer to "LCD Display Operation
Guide" (page 5) for more details.
⑧ Battery compartment
Operates on two AA batteries (not included).
⑨ PHONE jack
It is a 3.5mm diameter and stereo mini headphone jack.
Connect a headphone to monitor the audio output.
Note: Please do not connect a headphone with a mona-
ural mini jack. As this may short-circuit the headphone
jack and distorted sound output.
⑩ OUTPUT jack
Connect the RX10 to a video camera, camcorder, mixer or
amplifier with the supplied output cable.
⑪ Standard cold shoe