5 6
7 8
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
8
7) Plug the power cord into the socket on
the converter box.
5) Hang the converter box on the wall screws.
Do this by lining the screws up with the keyhole
slots on the bottom of the box, and slipping
the slots atop the screws.
Installing a Converter Box
—
Wall Mount
6) Attach the signal wiring to the input ports
and at least one pair of output ports.
8) If the Master clock has been connected,
powered, and configured, and the converter
box is powered and operating normally, the
colored LEDs on the front panel should be lit
or not lit depending on their function. See the
Status Panel section of this manual for more
information.
INP
UT
A
2-Wire
OUTPUT
POWER
A1A2 B1B2 C1C2
INP
UT
B
RS485
Output*
*The RS485 Output extends the RS485 signal to
other converter boxes. It DOES NOT provide 2-wire
power to clocks. Output A goes to Input A on the
next box, and Output B goes to Input B.
