manualshive.com logo in svg

Sapido PCI022 MZK-KR150NUS, User Manual

Share
Download
Sapido PCI022 MZK-KR150NUS User Manual Download Page 6

 

http://www.sapido.com.tw                              5                                            USER MANUAL V1.0

FCC Caution 

1. 

The device complies with Part 15 of the FCC rules. Operation is subject to the following 

conditions:  

2. 

This device may not cause harmful interference, and this device must accept any 

interference received, including interference that may cause undesired operation.   

3. 

FCC RF Radiation Exposure Statement: The equipment complies with FCC RF radiation 

exposure limits set forth for an uncontrolled environment. This equipment should be 

installed and operated with a minimum distance of 20 centimeters between the radiator 

and your body.   

4. 

This Transmitter must not be co-located or operating in conjunction with any other 

antenna or transmitter.   

5. 

Changes or modifications to this unit not expressly approved by the party responsible for 

compliance could void the user authority to operate the equipment.   

 

Summary of Contents for PCI022 MZK-KR150NUS











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands