manualshive.com logo in svg

Sapido PCI022 MZK-KR150NUS, User Manual

Share
Download
Sapido PCI022 MZK-KR150NUS User Manual Download Page 54

 

http://www.sapido.com.tw                              53                                            USER MANUAL V1.0

Click on “Apply Change” to save the setting data. Or you may click on “Reset” to clear all the 

input data. 

5. 

Current Access Control List 

In this list, all the MAC info you input will be displayed.   

6. 

Delete Selected and Delete All 

Click on “

Delete Selected

” to erase the selected MAC address. Click on “

Delete All

” to erase 

all the entered MAC Address.   

 

4.3.5 WDS 

Settings 

WDS

 (Wireless Distribution System) is a Wireless Access Point mode that enables wireless 

bridging in which only WDS APs communicate with each other (without allowing for wireless 

clients or stations to access them), and/or wireless repeating in which APs communicate both 

with each other and with wireless stations (at the expense of half the throughput). 

Internet

AP Router

WDS

AP Router

WDS

Wireless Connection

Wired Connection

 

Please follow the instructions to setup WDS connections. 

Summary of Contents for PCI022 MZK-KR150NUS











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands