manualshive.com logo in svg

Sapido PCI022 MZK-KR150NUS, User Manual

Share
Download
Sapido PCI022 MZK-KR150NUS User Manual Download Page 37

 

http://www.sapido.com.tw                              36                                            USER MANUAL V1.0

select 

Set DNS Manually

 and input the DNS information into the blank.   

8. 3.5G 

Backup 

The default interval between the two connection detection is 3 minutes, and the range is from 

1 to 60 minutes. Once Internet connection is disconnected, the system automatically 

connects Internet via 3.5G adapter. If 3.5G signal is not available, it starts to search 

downward for 3/2.75/2.5G signals until none existed. 

9. Clone 

MAC 

Address 

Copy the MAC address from the device you had registered to your ISP if your ISP asks for 

the specific MAC Address.   

10.  Enable IGMP Proxy 

The 

Internet Group Management Protocol (IGMP)

 is a communications protocol used to 

manage the membership of Internet Protocol multicast groups. IGMP is used by IP hosts and 

adjacent multicast routers to establish multicast group memberships. You can choose to 

enable 

IGMP Proxy

 to provide service. 

11.  Enable Ping Access on WAN 

Select 

Enable Ping Access on WAN

, will make WAN IP address response to any ping 

request from Internet users. It is a common way for hacker to ping public WAN IP address, to 

see is there any WAN IP address available. 

12.  Enable Web Server Access on WAN     

This option is to enable 

Web Server Access 

function on WAN. 

13.  Apply Changes & Reset 

Click on 

Apply Changes

 to save the setting data. Or you may click on 

Reset

 to clear all the 

input data. 

 

4.2.9 

WAN Access Type – PPTP 

If you have applied for a 

PPTP

 connection type from ISP, please follow the steps to set up 

your WAN connection.\ 

Summary of Contents for PCI022 MZK-KR150NUS











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands