Sanyo Xacti VPC-C5 Instruction Manual Download Page 63

Page: 63 / 194

English

PLAYING BACK AUDIO MEMOS

Listen to your audio recordings.

On the 9-image playback display,
move the orange frame to the audio
memo you wish to play back (page
56), and press the SET button.

A musical note graphic appears on
the screen.

Play back the recording.
Normal playback:

Press the SET button.

Pause:

While the audio memo is playing, toggle the SET button up.

Stop playback:

While the audio memo is playing, toggle the SET button down.

To accelerate playback:

Fast forward playback is possible at 2x (forward only), 5x, 10x and
15x.

Toggle the SET button to the left or right during playback to
activate fast playback.

The playback speed changes each time the SET button is toggled
to the left or right.

During forward payback, toggle SET button to the right

Normal playback

→

10x

→

15x

* Toggle the SET button to the left to return to normal playback

speed.

During reverse payback, toggle SET button to the left

15x

←

10x

←

Normal playback

* Toggle the SET button to the right to return to normal playback

speed.

CAUTION
If no audio is heard...

The audio is not played back when the audio memo is played back in the
fast playback or reverse playback mode.

00:00:00

Summary of Contents for Xacti VPC-C5



































































































































































































Search results

Summary of Contents for Xacti VPC-C5

Reviews:

Related manuals for Xacti VPC-C5

Brands by name

Popular brands

Sanyo Xacti VPC-C5, Instruction Manual

Search results

Summary of Contents for Xacti VPC-C5

Reviews:

Related manuals for Xacti VPC-C5

Brands by name

Popular brands