Sanyo Xacti VPC-C5 Instruction Manual Download Page 104

Page: 104 / 194

101

English

EDITING VIDEO CLIPS

Select whether you want the original video clip to be erased when
clipping is executed.
YES:

The original video clip is saved.

NO:

The original video clip is not saved.

Press the SET button.

If “YES” was selected, the edited video clip is saved as a new video
clip.

If “NO” was selected, the edited video clip is saved as a new video
clip, and the original video clip is erased.

NOTE

If the original video clip is protected (image protect), even if you select
“NO” in step 8 and press the SET button, the “IMAGE IS PROTECTED”
message appears, and video clipping is not possible.

Summary of Contents for Xacti VPC-C5



































































































































































































Search results

Summary of Contents for Xacti VPC-C5

Reviews:

Related manuals for Xacti VPC-C5

Brands by name

Popular brands

Sanyo Xacti VPC-C5, Instruction Manual

Search results

Summary of Contents for Xacti VPC-C5

Reviews:

Related manuals for Xacti VPC-C5

Brands by name

Popular brands