Sanyo Xacti VPC-C5 Instruction Manual Download Page 106

Page: 106 / 194

103

English

EDITING VIDEO CLIPS

Press the SET button.

The 9-image playback display for
video clips appears.

Toggle the SET button to move the
orange frame to the video clip that
you wish to join.

Press the SET button.

Select whether you want the
original video clip to be erased
when clipping is executed.
YES:

The original video clips are saved.

NO:

The original video clips are not saved.

Press the SET button.

The two video clips are saved
together as a separate video clip.

If “NO” was selected in step

, the

original video clips are erased when
the joined video clip is saved.

NOTE

If the original video clip is protected (image protect), even if you select
“NO” in step 8 and press the SET button, the “IMAGE IS PROTECTED”
message appears, and video clip joining is not possible.

101
0001 0002 0003

0004

Orange frame

JOIN

KEEP ORIGINAL IMAGE?

YES

EXIT

JOIN

<Confirmation screen for

saving the original video clip>

Summary of Contents for Xacti VPC-C5



































































































































































































Search results

Summary of Contents for Xacti VPC-C5

Reviews:

Related manuals for Xacti VPC-C5

Brands by name

Popular brands

Sanyo Xacti VPC-C5, Instruction Manual

Search results

Summary of Contents for Xacti VPC-C5

Reviews:

Related manuals for Xacti VPC-C5

Brands by name

Popular brands