manualshive.com logo in svg

Sanyo Xacti VPC-A5, Instruction Manual

Share
Download
Sanyo Xacti VPC-A5 Instruction Manual Download Page 88

87

English

PLAYBACK - ADVANCED OPERATION

Press the center controller button to preview 
the edit. 
The arrow above the bar indicates the 
playback frame. 

After playback, use the down key to 
continue if the edit is acceptable. To make 
changes to the edit, use the up key of the 
controller to return to the previous steps to 
adjust the start and end points. To cancel 
the edit operation, press the menu button. 

Press the center controller button to save 
the edit; a confirmation screen is displayed. 
Select “Yes” to continue. 

After the edited movie clip is saved, the file 
name is displayed. 

The original movie file can be deleted from 
the card by selecting “Yes” on the screen. 
Once deleted, it cannot be recovered. 
By selecting “No,” both the original and 
edited file remain on the card. 

:function                 :play

Preview edit.

Pause      Rew    Fwd     Vol

:function                 :save

Save edit.

Yes

No

Save edit?

:function                 :save

Save edit.

Yes

No

Saved as VCLP0004.MOV.

Delete original file? 

Summary of Contents for Xacti VPC-A5




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands