manualshive.com logo in svg

Sanyo Xacti VPC-A5, Instruction Manual

Share
Download
Sanyo Xacti VPC-A5 Instruction Manual Download Page 45

English

44

FLASH RANGE - AUTOMATIC OPERATION

The camera automatically controls the flash output. For well-exposed images, 
the subject must be within the flash range. Because of the optical system, the 
flash range is not the same at the lens’ wide-angle position as it is at the 
telephoto position. The flash range can be changed with camera sensitivity 
(ISO) (page 64). 

Wide-angle position

Telephoto position

0.2 m to 3.2 m (0.7 ft. to 10.5 ft.)

0.1 m to 1.8 m (0.3 ft. to 5.9 ft.)

FLASH SIGNALS

The indicator lamp next to the viewfinder 
indicates the status of the flash. When 
the lamp is orange and blinks quickly, 
the flash is charging and the shutter will 
not release. The lamp glows steadily for 
three seconds when the flash is 
charged. 

DISPLAY BUTTON - RECORDING MODE

The display button controls the LCD monitor display. The display cycles to the 
next position each time the button is pressed: full display, live image only, and 
monitor off. The monitor cannot be turned off for movie/audio recording. If the 
display button is pressed and held, the LCD-brightness adjustment screen is 
displayed (page 93). 

Display 
button

Full display

Live image only

Summary of Contents for Xacti VPC-A5




























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands