Sanyo VPC-J2 Instruction Manual Download Page 177

Page: 177 / 204

English

174

Question

Answer

Action

Shooting

While the flash is
recharging, why
does the LCD
monitor suddenly
turn off?

Battery pack
power is low,
activating the
function that
momentarily turns
off the LCD
monitor.

Not a malfunction.
When the flash is
fully charged, the
LCD monitor will
turn on again.

Why isn’t the
image captured
when the shutter
release button is
pressed?

The accessing
indicator is lit
orange (data is
being recorded).

Wait until the
accessing
indicator lights
green to capture
the image.

Why does the
accessing
indicator light
orange?

Recorded data is
being saved on
the card.

Not a malfunction.
Wait until the
accessing
indicator changes
to green before
capturing the
image.

Why doesn’t the
flash operate?

The digital
camera has
determined that
the image is bright
enough and the
flash is not
necessary.

Not a malfunction.
Capture the
image; the digital
camera will
determine when
the flash is
necessary.

Why doesn’t the
exposure of
captured images
in the AE shift
sequential shots
change?

The exposure
may not change
due to the
surrounding
brightness.

This is not a
malfunction.

Camera_EN.book Page 174 Sunday, August 31, 2003 3:48 PM

Summary of Contents for VPC-J2













































































































































































































Search results

Summary of Contents for VPC-J2

Reviews:

Related manuals for VPC-J2

Brands by name

Popular brands

Sanyo VPC-J2, Instruction Manual

Search results

Summary of Contents for VPC-J2

Reviews:

Related manuals for VPC-J2

Brands by name

Popular brands