manualshive.com logo in svg

Sanyo VA-SW814, Instruction Manual, Page: 97 / 100

Share
Download
Sanyo VA-SW814 Instruction Manual Download Page 97

96

English

MP2 Viewer

•

To remove files from the queue:
Select a file in the playback queue list and 

then click 

.

4

Changing the order of playback.
The files that have been queued for 

playback are played back continuously in 

the order that they are displayed in the list. 
To change the order of playback, select a 

file in the playback queue list and click 

 

or 

 to move the file up or down in the 

order of display.

In the same way as in the file list, you can 
also sort the files in the playback queue list 
in ascending or descending order based on 
a specified display item. (P.95)

5

Click [OK].
The “Play List” window will close and 
playback of the specified files will start.

(You can also start playback by 
double-clicking the playback queue list.)

●

Playback operation buttons

Use the toolbar command buttons for playback 
operations.

1

Stop button:
If clicked during playback (including cue/
review/slow playback/pause), playback will 
stop.

2

Still button
If clicked during playback (including cue/
review/slow playback), playback will be 
paused and a still image will be displayed. 
If clicked while the image is paused, frame 
advance playback starts.

3

Slow play button
If you click this button while a still image is 
being displayed, the playback mode will 
switch to slow playback, and the playback 
speed will change each time you click again.

(×1/8 

→

 ×1/4 

→

 ×1/2)

4

Review button
If clicked during playback (including cue/
pause), reverse playback will start.

5

Playback button
If clicked, playback is carried out at the 
standard speed.

6

Cue button
If clicked during playback (including review/
pause), fast-forward playback will start.

7

Zoom in/Zoom out buttons
These operate in the same way as [ZOOM IN/
ZOOM OUT] in the Option menu. (P.91)

1

2

3

4

5

6

7

  +   " #$%&'

Summary of Contents for VA-SW814





































































































Reviews:

No comments