42
English
MENU SETTINGS (MENU WINDOW)
(User Level: ID4)
2
AUDIO RECORDING (Default setting: ON)
This sets whether audio is to be recorded at
the same time as images (when alarm
recording is not in progress). Select “ON” or
“OFF”, click [APPLY] and then click [OK].
Available settings:
•
ON: Audio signals are also recorded.
•
OFF: Audio signals are not recorded.
If [AUDIO RECORDING] has been set to
[ON], set [AUDIO REC LEVEL SET] for each
channel.
Available settings: 1–10 (Default setting: 5)
3
OVERWRITE (Default setting: ON)
This sets what is to happen when the hard
disk recording area becomes full.
Available settings:
•
ON: When the recording area becomes full,
recording continues automatically with new
images being recorded over the top of
already-recorded images.
(The [DISK FULL RESET] button is forcibly
locked.)
•
OFF: When the recording area becomes
full, recording stops automatically.
(The [DISK FULL RESET] button is forcibly
unlocked.)
●
Resuming recording that has been halted
If “OVERWRITE” has been set to “OFF”,
recording will stop automatically when the hard
disk recording area becomes full and the “DISK
FULL” criteria are met.
When this happens, you can resume recording in
overwrite mode by clicking
.
However, this varies from the normal situation
when “OVERWRITE” is set to “ON” in that the
data is only overwritten once, and when the
recording area becomes full again, recording will
stop once more.
4
SERIES REC (Default setting: OFF)
If the series recording function has been set
when more than one DVR is connected,
recording can continue onto a second or
subsequent hard disk when one hard disk
becomes full. If using series recording, use
the drop-down list box to select the timing for
recording onto a 2nd hard disk to start, click
[APPLY] and then click [OK].
(The SERIES REC setting is only valid when
“OVERWRITE” is set to “OFF”.)
Available settings:
•
OFF: Series recording is not carried out.
•
–1M: Approximately 1 minute before the
hard disk becomes full
•
–2M: Approximately 2 minutes before the
hard disk becomes full
•
–3M: Approximately 3 minutes before the
hard disk becomes full
If the computer does not have a sound
card installed (or if the sound card is
disabled), it will not be possible to
monitor DVR images which have
[AUDIO RECORDING] set to [ON] or to
play back the audio portions of
recordings.
If recording continues for long periods
while “OVERWRITE” is set to “ON”, old
images will be overwritten and deleted
in the order that they were recorded.
You should regularly make copies of
any important data if necessary.
This setting menu is not applicable for
the DSR-M800.
( " #$%&'
