Sanyo SCP 4900 Operating Manual Download Page 55

Page: 55 / 91

Changing your Phone’s Setting

Adjusting the Ringer/Key volume

To change the ringer/key volume:
8. From the Standby mode, press Menu to display the main menu.
9. Highlight

Settings

, and press OK.

10. Highlight

Sounds

, and press OK.

11. Highlight

Ringer/Key Vol.

, and press OK.

12. Select the menu under each item

Ringer Volume

for adjusting Ringer tone volume.

●

Start-up/Pw-off

for adjusting Start-up/Power-Off tone volume.

Key Beep

for adjusting Key Beep tone volume.

13. Highlight your desired volume level, and press OK.

●

Ringer Off

to set the Voice/Data/Fax Call ringer volume to off.(Only appears in

Ringer Volume Setting).

●

Silence All

to set all the ringer volume to off. (Only appears in Ringer Volume

Setting).

Tip: You can adjust the ringer volume in Standby mode by using up or down of the side volume key.

Tip: When Ringer Volume is set as Silence All, other items are changed to Off and cannot be

highlighted by cursor.

Adjusting Volume During a Conversation

To adjust volume in between calls:
1. From the Standby mode, press Menu to display the main menu.
2. Highlight

Settings

, and press OK.

3. Highlight

Sounds

, and press OK.

4. Highlight

Receiver Volume

, and press OK.

5. Select

Earpiece

Speaker

, and press OK.

6. Highlight your desired volume level.
Tip: You can adjust the receiver volume during a conversation by using the up/down of
the side volume key.

Summary of Contents for SCP 4900




























































































Search results

Summary of Contents for SCP 4900

Reviews:

Related manuals for SCP 4900

Brands by name

Popular brands

Sanyo SCP 4900, Operating Manual

Search results

Summary of Contents for SCP 4900

Reviews:

Related manuals for SCP 4900

Brands by name

Popular brands