background image

Thank you for your purchase of the Sanyo Vacuum Cleaner.
Please read these instructions carefully before using.

A FEW PRECAUTIONS

2. Keep the vacuum cleaner away from stoves and other heat sources. 
    Heat can deform and discolor the plastic parts of the unit.

3. Keep the vacuum cleaner free of insecticides. Do not wipe with benzine, 
    thinner, petrol or other oils which might cause discoloration or cracking.

To clean the body and hose, dampen a cloth with a mild detergent and 
wipe clean.

4. Blocking the suction inle 

t o 

r allowing the dus 

t to clog the hose wil 

l

   damage the motor.

1.  Operation  without the dust compartment and /or filters in place will allow

    dust to enter the motor and could damage the vacuum cleaner. 

    

5. Be sure not to push the clamp button while carrying the vacuum cleaner.

7. The following kinds of treatment shorten hose life:

* Bending hose at an acute angle when storing
* Pulling the hose with excessive force

* Placing heavy objects on, or stepping on the hose

8. Pull out the plug from the power source after use. Grasp the plug not 
    the cord when pulling out the plug. 
    Pulling on the cord may lead to short circuit.

9. Long and continuous use causes the exhaust air and the body of the 
    vacuum cleaner to become warm. This, however, does not denote 
    malfunction.
10. When vacuuming places that are very dusty, and also when vacuuming 
      regularly, empty the dust compartment before it becomes completely 
      filled.

Frequent emptying lengthens the life of the motor and maintains strong 
suction power.

11. If the supply cord of this appliance is damaged, it must only be replaced 

 by the manufacturer, its designated repair shop, or a professional, in 
 order to avoid a hazard.

12. Do not allow it to be used as a toy. Close attention is necessary when
      used by or near children or infirm persons.

6. Never try to vacuum the following objects. They may damage the unit or 
     cause  a  fire.

* Wet things, mud, soil, and fluids

* Burning cigarettes
* Needles and razor blades
* Inflammable materials such as gasoline and thinner
* Construction rubbish

13. Unplug the appliance from outlet before cleaning or maintaining.
14.This appliance is not intended for use by young children or infirm 
     persons unless they have been adequately supervised by a responsible 
     person to ensure that they can use the appliance safely.
15.Young children should be supervised to ensure that they do not play 
     with the appliance.

Summary of Contents for SC-N525T









Reviews: