4
NAMES OF PARTS
This illustration is based on the external view of a standard model.
Consequently, the shape may differ from that of the air conditioner
which you have selected.
This air conditioner consists of an indoor unit and an outdoor unit.
You can control the air conditioner with the remote control unit.
UNIT DISPLAY AND OPERATION
BUTTON
Avoid using radio equipment such as mobile phone near
(within 1 m) the remote control receiver. Some radio
equipment may cause malfunction of the unit.
If the trouble happens, disconnect power and restart the air
conditioner after a few minutes.
• The front panel of the indoor unit operates automatically when
starting and stopping operation. The panel opens slightly when
operation starts, and closes when operation stops.
• The unit’s display lamps are dimmed during operation in the
NIGHT SETBACK mode.
Air Intake
Air from the room is drawn into this section
and passes through air filters which remove
dust.
Air Outlet
Conditioned air is blown out of the air
conditioner through the air outlet.
Remote
Control Unit
The wireless remote control unit controls
power ON/OFF, operation mode selection,
temperature, fan speed, timer setting, and air
sweeping.
Refrigerant
Tubes
The indoor and outdoor units are connected
by copper tubes through which refrigerant gas
flows.
Drain Hose
Moisture in the room condenses and drains off
through this hose.
Outdoor
(Condensing)
Unit
The outdoor unit contains the compressor, fan
motor, heat exchanger coil, and other
electrical components.
INDOOR UNIT
Air intakes
Remote control unit
Air outlet
Refrigerant tubes
Drain hose
OUTDOOR UNIT
Air outlet
NOTE
REMOTE
CONTROL
receiver
This section picks up infrared signals from the
remote control unit (transmitter).
OPERATION
button
When the remote control cannot be used,
pressing this button with a small pointed tool
enables heating and cooling operation.
Each time this button is pressed, the type of
operation conducted is indicated by the
changing color of the OPERATION lamp.
Press the button and select the lamp color
that suits your preference for operation.
Do not set at the TEST for normal
operation.
This mode is used only when servicing the air
conditioner.
OPERATION
lamp
This lamp lights when the system is in the
continuous AUTO (red or green), HEAT (red),
DRY (orange), COOL (green) and FAN
(green) mode.
The OPERATION lamp lights up red and
orange alternately when the system is
defrosting.
TIMER lamp
This lamp lights when the system is being
controlled by the timer.
LED CLEAN
lamp
This lamp lights during operation in the UV
anti-bacterial mode.
REMOTE CONTROL
receiver
OPERATION lamp
TIMER lamp
OPERATION button
INDOOR UNIT
LED CLEAN lamp
TEST button
IMPORTANT
Cooling
operation
(green)
Heating
operation
(red)
Stop
(lamp off)
CAUTION
NOTE
OI-925-4-EG
01_SAP-KRV96EHDS_EN.fm Page 4 Wednesday, January 17, 2007 9:51 AM
