manualshive.com logo in svg

Sanyo PLV-HD2000E, Service Manual

Share
Download
Sanyo PLV-HD2000E Service Manual Download Page 1

FILE NO.

SERVICE MANUAL    

REFERENCE NO.

SM

5110803-

00

PRODUCT CODE  :

PLV-HD2000N

MA4A

1 122 323 00

U.S.A., Canada

PLV-HD2000E

PA4A

1 122 332 00

Europe, Asia, Africa

PLV-HD2000E

PA4C

1 122 332 02

U.K.

Multimedia Projector

Give complete “CHASSIS NO." for

parts order or servicing, it is shown on

the rating sheet on the cabinet of the

Projector.

Chassis No. MA4-HD2000N00

PA4-HD2000E00

NOTE:

Match the Chassis No. on the rat-

ing sheet on the cabinet with the
Chassis No. in the Service
Manual.

If the Original Version Service
Manual Chassis No. does not
match the unites,

additional

Service Literature is required.
You must refer to “Notices” to the
Original Service Manual prior to
servicing the unit.

MODEL NO.

PLV-HD2000N

U.S.A., Canada

PLV-HD2000E

U.K., Europe

(Projection lens is optional.)

Original Version

 RoHS

• This product does not contain any hazardous sub-

stances prohibited by the RoHS Directive. (You will
find “RSF” mark near the rating plate on the RoHS
compliant product.)

!

 WARNING

• You are requested to use RoHS compliant parts for

maintenance or repair.  

• You are requested to use lead-free solder.

Summary of Contents for PLV-HD2000E







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands