Sanyo PLV-55WM1 Service Manual Download

Page: 15 / 152

Exhaust vents (Hot air exhaust)

- 15 -

This LCD Projection Monitor is equipped with cooling fans

for protection from overheating. Pay attention to following

to ensure proper ventilation and avoid a possible risk of fire

and malfunction.

- Do not cover vent slots.

- Keep front lower part clear any objects.

Obstructions may block cooling air.

Hot air is exhausted from the exhaust vents.

When using or installing the LCD Projection Monitor,

the following precautions should be taken.

– Do not put any flammable objects near the vent.

– Keep the exhaust vent at least 1.5’(50cm) away

from any objects.

– Do not touch a peripheral part of the exhaust vent,

especially screws and metallic part. This area will

become hot while the LCD Projection Monitor is

being used.

Cooling fans are provided to cool down the LCD

Projection Monitor. This LCD Projection Monitor mon-

itors internal temperature and control the running

speed of the cooling fans.

Caution;

Air intake vents

BACK OF CABINET

Exhaust Vents

FRONT OF CABINET

Air intake vents

The front part of the speaker grill cover is an air intake.

Do not cover vent slots.

ON OF CAB

Summary of Contents for PLV-55WM1

























































































































































Search results

Summary of Contents for PLV-55WM1

Reviews:

Related manuals for PLV-55WM1

Brands by name

Popular brands

Sanyo PLV-55WM1, Service Manual

Search results

Summary of Contents for PLV-55WM1

Reviews:

Related manuals for PLV-55WM1

Brands by name

Popular brands