- 12 -
The LAMP REPLACE indicator will light orange when
the total lamp used time reaches 5000 hours. This is
to indicate that lamp replacement is required.
The total lamp used time is calculated by using the
below expression;
Total lamp used time =
T
eco
+
T
norma
l
T
eco
: used time in the Eco2 mode
T
normal
: used time in the Normal, Auto and Eco1
mode
You can check the lamp replace counter following to
below procedure.
1
Press and hold the
MENU
and
SELECT
button on
the LCD Projection Monitor for more than 3 seconds.
2
The LCD Projection Monitor used time and lamp
used time will be displayed on the screen briefly.
Counter
LCD projection monitor :
Lamp
Normal
Eco
Total
0150H
0050H
0100H
0150H
:
:
:
Total lamp used time
●
How to check Lamp Used Time
LCD Projection Monitor used time
Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset,
the LAMP REPLACE indicator stops lighting.
Turn the LCD Projection Monitor on, press the MENU
button, and the On-Screen Menu will appear. Select
the Setting Menu with the Point Up/Down button and
press the Point Right button to enter the sub-menu.
Select the Lamp counter reset item and then press the
SELECT button. The message "Lamp replace counter
Reset?" is displayed. Choose [Yes] and then press the
SELECT button.
1
2
Another confirmation dialog box appears and choose
[Yes] to reset the Lamp replace counter.
3
NOTE:
●
Do not reset the Lamp replace counter without
implementation of lamp replacement. Be sure to reset the
Lamp replace counter only after replacing the lamp.
Lamp counter reset
●
Lamp replace counter reset
●
L
Lamp rep a e co
oun er ese
