- 26 -
C
C
C
B
B
A
FN904
HOLDER FAN POWER
BALLAST UNIT
SPACER
The direction of a
wind
A
A
A
10
-1 Ballast unit removal.
1. Remove the
4
screws
A
(M4 x 20), remove the Spacer and remove the
FAN (FN904).
2. Remove the
2
screws
B
(T3 x 8) and remove the Holder fan power.
3. Remove the
3
screws
C
(T3 x 8) and remove the Ballast unit.
Note;
Mark the Fans as they are removed from the holder so that they may be reassembled in the same location
from which they were removed. Be careful of the attached direction of Fans.
See arrow mark in a figure.
Mechanical disassemblies
Fig. 10-1
10
-1
1
Balla
1 Rem
t uni
emoval.
A
(
h
