Sanyo PLC-XU88W, Owner'S Manual

Page: 48 / 78

7
Setting
Setting
Display
Blue back
When this function is “On,” a blue image is displayed while
the input signal is not detected.
Keystone
This function is used to store or reset the keystone
correction when the AC power cord is unplugged. Use the
Point
◄►
buttons to switch between each option.
Store ........ Keep the keystone correction even when the
AC power cord is unplugged.
Reset ....... Release the keystone correction when the AC
power cord is unplugged.
To correct keystone distortion, press the SELECT button.
The “Keystone” appears on the screen. Use the Point
▲▼
buttons to correct keystone distortion (p.25).
Keystone
This function decides whether to display On-Screen
Displays.
On ............................ Show all the On-Screen displays.
Use this function when you want
to project images after the lamp
becomes bright enough. The factory
default setting is in this option.
Countdown Off ......... Show the input image instead of
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
Off ............................ Hide the On-Screen Displays except;
● On-Screen Menu
● “Power off?” (p.22)
● “No signal” for Power management
(p.51)
● “Please wait ...”
● Arrows for the True function in the
Screen Menu (p.37)
Use the Point
◄►
buttons to switch
between the options.