-25-
Optical Adjustments
[Before Adjustment]
- Input a 100% of black raster signal.
1
Loosen a screw
A (Fig.1)
on the polarized glass mounting base
which you intend to adjust.
2
Adjust the slot
B
to obtain the darkest brightness on the screen by
using a slot screwdriver.
3
Tighten the screw
A
to fix the polarized glass mounting base.
Repeat steps 1 to 3 for remaining polarized glasses.
Fig.1
Polarized glass
mounting base
A
Contrast adjustment
Before taking optical adjustments below, remove the Cabinet Top following to the “Mechanical Disassembly”.
Adjustments require a 2.0mm hex wrench and a slot screwdriver. When you adjust Integrator lens or Relay lens
adjustment, you need to disconnect FPC cables of LCD panels on the main board.
Optical adjustment requires a 2.0mm hex wrench and a slot screwdriver.
Note: Do not disconnect connectors on the main board, because the projector cannot turn on due to operate the
power failure protection.
WArNING : uSe uV rAdIAtIoN eYe ANd SKIN Pro-
tectIoN durING SerVIcING
cAutIoN: to prevent suffer of uV radiation, those adjustment must be
completed within 25 minutes.
Slot B
Summary of Contents for PLC-XU116
Page 65: ... 65 IC Block Diagrams FA5550NG P F Control IC621 IC87F2G08A5AT6 UART IC9885 ...
Page 66: ... 66 IC Block Diagrams SP3232ECYP RS 232C Driver IC3801 MR4010 Power OSC IC631 ...
Page 68: ... 68 IC Block Diagrams PW190 Scaler IC301 ...
Page 104: ... KC8AC February 2010 DC 200 Printed in Japan SANYO Electric Co Ltd ...
