-12-
Security Function Notice
This projector provides security functions such as "Key lock", "PIN code lock" and "Logo PIN code lock". When the pro-
jector has set these security function on, you are required to enter correct PIN code to use the projector. If you do not
know the correct PIN code to the projector, the projector can no longer be operated or started. In this case, you must
reset those function first according to the resetting procedure described below and then check up on the projector.
Resetting procedure
1.
Disconnect the AC power cord from the AC outlet.
2.
As pressing the
Select
button, connect the AC power cord into an AC outlet again.
3.
Keep pressing the
Select
button and then press the
oN/StANd-BY
button.
4.
Release the
oN StANd-BY
button first and then release the
Select
button.
- The PIN code lock and Logo PIN code lock will be reset as the initial PIN code at the factory and
the key lock function is disabled.
Please refer to the owner's manual for further information of the security functions.
Function
description
Key lock
Locks operation of the top control or the remote con-
trol.
If the Key lock is enabled with top control lock, the pro-
jector can no longer be started.
Initial setting: Key lock function is disabled
PIN code lock
Prevents the projector from being operated by an un-
authorized person.
Initial code: “1234”
logo PIN code lock
Prevents an unauthorized person for changing the
start-up logo and captured image on the screen.
Initial code: “4321”
Security Function Disable
Summary of Contents for PLC-XU116
Page 65: ... 65 IC Block Diagrams FA5550NG P F Control IC621 IC87F2G08A5AT6 UART IC9885 ...
Page 66: ... 66 IC Block Diagrams SP3232ECYP RS 232C Driver IC3801 MR4010 Power OSC IC631 ...
Page 68: ... 68 IC Block Diagrams PW190 Scaler IC301 ...
Page 104: ... KC8AC February 2010 DC 200 Printed in Japan SANYO Electric Co Ltd ...
