Sanyo PLC-XU116, Owner'S Manual

Page: 353 / 399

110
Chapter 9 Appendix
Auto Caputure
DHCP server (Dynamic Host Configuration Protocol)
It is necessary to set an IP address for each computer or equivalent equipment when a network is
established by TCP/IP. If there exists DHCP server on the network, it will assign IP addresses to client
computers every time they request it. If there exists equipment with DHCP server functions (such as
a server and a router) on the network, the DHCP server function may be automatically operating. Ask
your system administrator whether the DHCP server is operating.
ESSID (Extended Service Set Identifier)
ESSID is the ID that is set to computers on Wireless LAN or access point in order to prevent each
computer from being crossed. The computers or access point to which the same ESSID is set can
communicate with each other. If an ESSID is different, it is impossible to communicate. ESSID
distinguishes between lowercase and uppercase characters, and allows you to use English one byte
characters and half-size symbols up to 32 characters.
WEP (Wired Equivalent Privacy)
WEP is a security protocol for Wireless LAN. It protects computers on Wireless LAN and access point
from unauthorized access by setting a description code onto them. It is necessary to set the same
decryption code for equipment.
Terminology
N
I have deleted the AutoCapture program file on the supplied USB memory.
I want to perform the AutoCapture with a commercially available USB memory.
To perform Auto Capture, you should have all files and folders of "Auto Capture" folder on ‘Network
Viewer & Capture 5 (CD-ROM)’ on the root of USB memory. By copying or drag and dropping
those files and folders on the root of a commercially available USB memory, you can perform the
AutoCapture as well as a supplied USB memory.