Sanyo PLC-XU116, Owner'S Manual

Page: 333 / 399

90
Chapter 8 Network capture functions
Start up the Network Capture 5
To start up the Network Capture 5, click "Network Capture 5" from "Macintosh HD" - "Application"
- "Network Capture 5" menu. The application window will appear and search the projectors in the
network and list them on the projector list.
If any projector is not listed, check followings and then search again by pressing
Search PJ button.
- Is the projector turning on and connected to the network?
- Is the network setting of projector and computer configuring correct?
- Is the same capture port no. used among computer and projectors?
About Network Capture function
The Network Capture is a function to display the screen image of the computer which has a Network
Capture 5 software by the projector through the network. This function has a mode as below.
- Real Time Capture ( p.93)
A function to display the screen image of the computer by the projector through the network in real
time.
Up to 30 computers can be registered.