background image

59

Be sure to reset the Scroll counter after replacing the filter 

cartridge. 

Press the MENU button to display the On-Screen Menu. Use 

the Point 

7 8

 buttons to move the red frame pointer to the 

Setting Menu icon.

Use the Point 

ed

 buttons to move the red frame pointer to 

Filter counter and then press the SELECT button. A dialog 

box appears showing the Used time option and the Scrolls 
remaining option. Use the Point 

ed

 buttons to select  

Scroll(s) remaining.

1

2

Resetting the Scroll Counter

Scroll counter

Another confirmation dialog box appears, select [Yes] to 

reset the Scroll counter.

3

Scroll(s) remaining shows the number of the remaining 

scrolls and the Reset option. Select Reset and the “Scroll 

counter Reset?” appears. Select [Yes] to continue.

4

Be sure to reset the Filter counter after replacing the filter 

cartridge. 

Press the MENU button to display the On-Screen Menu. Use 

the Point 

7 8

 buttons to move the red frame pointer to the 

Setting Menu icon.

Use the Point 

ed

 buttons to move the red frame pointer to 

Filter counter and then press the SELECT button. A dialog 

box appears showing the Used time option and the Scrolls 
remaining option. Use the Point 

ed

 buttons to select  Used 

time.

1

2

Resetting the Filter Counter

Filter counter

Select Reset and the “Filter 
counter Reset?” appears.

Select [Yes], 
then another 
confirmation 
box appears.

Select [Yes] again to reset 
the Filter counter.

Another confirmation dialog box appears, select [Yes] to 

reset the Filter counter.

3

Used time shows the total accumulated time of the filter 

use, a timer setting option, and the Reset option. Select 

Reset and the “Filter counter Reset?” appears. Select [Yes] 

to continue.

4

Select “Used time” and the 
dialogue box below appears.

Select “Scrolls remaining” and 
the dialogue box below appears.

Select Reset and the “Scroll 
counter Reset?” appears.

Select [Yes], 
then another 
confirmation 
box appears.

Select [Yes] again to reset 
the Scroll counter.

Maintenance and Care

Summary of Contents for PLC-XF70





















































































Reviews: