Sanyo PLC-XC56, Owner'S Manual

Page: 56 / 174

56
This function provides the following options in the cooling
fans’ operation when the projector is turned off (p.20).
L1 ...... Normal operation
L2 ...... Slower and lower-sound than the normal operation
( L1 ), but it takes more time to cool the projector down.
Setting
Fig.1 Filter replacement icon
Filter counter
Press the SELECT button to select Timer , and then use
the Point
Ÿź
buttons to set the timer. Select from ( Off /
400H / 700H / 1000H ) depending on the use environment.
3 Note:
• Fig.1, Fig.2, Fig.3 and Fig.4 appear at turning
on and selecting input source.
• Fig.1, Fig.2, Fig.3 and Fig.4 will not appear
when the Display function is set to “Off” (p.46),
during “Freeze” (p.25), or “No show” (p.26).
This function is used to display the cumulative lamp
operating time and reset the lamp counter.
When the lamp life is left 0 hour, the Lamp replacement icon
(Fig.1) will appear on the screen, indicating that the end of
lamp life is reached.
When replacing the projection lamp, reset lamp counter.
See "Resetting the Lamp Counter" on page 65.
This icon appears on the screen when the end of
lamp life is reached.
Fig.1 Lamp replacement icon
3
Note:
At turning on, the icon (Fig.1) will appear.
3
Note:
The Lamp replacement icon (Fig.1) will not appear when
the Display function is set to
Off (p.46), during “Freeze”
(p.25) or “No show” (p.26).
Fig.2
Fig.3 Last scroll icon
Fig.4 Filter cartridge replacement icon
Filter replacement icon appears on the
screen at a set time.
Last scroll icon appears on the screen
when the filter is down to the last scroll.
Filter cartridge replacement icon appears
on the screen when the filter scroll is
counted down to 0 scroll.
3
Note:
• Do not reset the counter(s) when the filter or the filter
cartridge are not replaced.
• Timer setting notifies that the filter needs replacement. To
replace the filter, use the filter control function (p.53).
Fan
Lamp counter
Filter counter
This function is used to set a frequency for the filter replacement.
8VHWKH3RLQWŸźEXWWRQVWRVHOHFW)LOWHUFRXQWHUDQGWKHQ
press the Point
Ź
or the SELECT button to accese the
submenu items.
Filter counter ......Show the total accumulated time of the
filter use timer setting.
Timer ...................To set a timer, when the projector reaches
the time, the Filter replacement icon (Fig. 1)
appears on the screen and the total
accumulated time turns red, indicating
that the filter replacement is necessary. If
the filter is out of scroll and the projector
reaches a time set in the timer setting, Fig.
2 appears on the screen, indicating that the
filter cartridge replacement is necessary.
Filter counter reset ..When replacing the Filter cartridge, reset the
Filter counter and the Scroll counter (p.62).
Scrolls remaining ...When the filter scroll is counted down
to 1 , Scroll counter on the screen is
showing “0 scroll(s)” , the last scroll
icon (Fig. 3) appears on the screen.
When the filter scroll is counted down
to
0 , the Filter cartridge replacement
icon (Fig. 4) appears on the screen and
the WARNING FILTER indicator lights
orange, indicating that the filter cartridge
replacement is necessary.
Scroll counter Reset ..When replacing the Filter cartridge, reset the
Filter counter and the Scroll counter (p.62).