manualshive.com logo in svg

Sanyo PLC-WXU30, Owner'S Manual, Page: 50 / 270

Share
Download
Sanyo PLC-WXU30 Owner'S Manual Download Page 50

50

Logo PIN code lock

Setting

This function prevents an unauthorized person from 
changing the screen logo.

Off............ The screen logo can be changed freely from 

the Logo Menu (p.49).

On............ The screen logo cannot be changed without 

a Logo PIN code.

If you want to change the Logo PIN code lock setting, 
press the SELECT button and the Logo PIN code dialog 
box appears. Enter a Logo PIN code by following the 
steps below. The initial Logo PIN code is set to “4321” at 
the factory.

Logo PIN code lock

Enter a Logo PIN code

Use the Point 

! 

 buttons to enter a number. Press the 

Point

 

 button to fix the number and move the red frame 

pointer to the next box. The number changes to “

6

.” If you 

fixed an incorrect number, use the Point 

 button to move 

the pointer to the number you want to correct, and then 
enter the correct number.

Repeat this step to complete entering a four-digit number.

After entering the four-digit number, move the pointer to 
“Set.” Press the SELECT button so that you can start to 
operate the projector.

If you entered an incorrect Logo PIN code, “Logo PIN 
code” and the number (

6666

) will turn red for a moment. 

Enter the correct Logo PIN code all over again.

Change the Logo PIN code

Logo PIN code can be changed to your desired four-digit 
number. Press the Point 

 

 button to select “Logo PIN 

code change” and then press the SELECT button. The 
New Logo PIN code input dialog box appears. Set a new 
Logo PIN code.

Be sure to note the new Logo PIN code and keep it at 
hand. If you lost the number, you could no longer change 
the Logo PIN code setting. For details on PIN code
setting, refer to “PIN code lock” on pages 54–55.

Use the Point 

 

 buttons to switch On/Off, and then 

press the Point 

 

 button to move the pointer to “Quit.” 

Press the SELECT button to close the dialog box.

Change the Logo PIN code lock setting

Enter a Logo PIN code

After a correct Logo PIN code 
is entered, the following dialog 
box appears.

CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN
CODE, WRITE DOWN THE NEW PIN CODE
IN COLUMN OF THE LOGO PIN CODE NO.
MEMO ON PAGE 80, AND KEEP IT SECURELY.
SHOULD THE LOGO PIN CODE BE LOST OR
FORGOTTEN, THE LOGO PIN CODE SETTING
CAN NO LONGER BE CHANGED.

Change the Logo PIN code lock setting

Change the Logo PIN code

Use the Point 

 

 buttons to 

switch On/Off.

Summary of Contents for PLC-WXU30















































































































































































































































































Reviews:

No comments