Sanyo PLC-WXU30, Owner'S Manual, Page: 183 / 270

101
English
Network Communication operation and change of state
Network Communication can be used under the environment which one or more computers are con-
nected to the projector via the network.
Preparation
Start up the Network Capture 4 software on the subject computer. Set standby the projector or turn it
on. Check IP address of the subject computer is registered in the connection list ( p.95).
Operation on the Main PC Operation on the Sub PC
O
n
the
C
o
mmunica
tion
M Executing the command "Start Communication".
The capture editing window appears on the
screen.
Frame
M
Executing the command "Start Communication".
Execute the command "Start Editing" on the task
bar.
The capture image on the Main PC
appears on the screen.
Frame
R B
K Editing the capture image.
The editing information is automatically
transferred to the Sub PC.
R
The editing information on the Main PC is
reflected on the Sub PC.
B
6 Releasing the editing authority.
The color of authority status frame changes green.
G
The color of authority status frame chang-
es green.
G
The color of authority status frame changes blue.
B
K
Acquiring the authority.
The color of authority status frame chang-
es red.
R
The editing information on the Sub PC is
reflected on the Main PC.
B
6
Editing the captured image using with the
tools.
The editing information is automatically
transferred to the subject PC.
R
The color of authority status frame changes green.
G
I
Releasing the editing authority.
The color of authority status frame chang-
es green.
G
I Acquiring the authority.
The color of authority status frame changes red.
R
The color of authority status frame chang-
es blue.
B
5 Repeat steps K , 6 if required.
5
Repeat steps
K
to
I
if required.
A Executing the command "Capture transfer" on
the task bar.
Updating the editing window with a new
captured screen image.
R
A new captured screen image appears on
the editing window.
B
@
Repeat steps
K
to
5
.
Ending the communication.
The capture editing window disappears.
R
The capture editing window disappears.
The projector projects the edited captured image on the screen when the input mode of the projector is
set "Network".
The command "Save Communication" can be executed in any of the mode even if the PC does not have
the authority.
The arrow ( ) shows a response to the command executed.
The execution of the command "Terminate Communication" or "End Editing" on the Sub PC has no effect
on the other subject computers.
Network Communication operation and change of state