Sanyo PLC-WXU30, Owner'S Manual, Page: 143 / 270

61
English
Up to 99,999 hours can be set for the time setting.
If condition "When Auto Play is failed" is checked, the trap is sent when the error occurs during the auto dis-
play operation using with the network viewer function (
p.109). For further information of the error, refer to
item "Auto Display setting and control page [3]"(( p.123).
Trap option
Trap option setting
Tick the check boxes in front of the condition item to send the trap.
Click
Set
button if you tick or un-tick the check box on a page.
[1]––––––––––––––––––––––––––––––––––
O When PJ lamp is off.
O When PJ lamp replacement time is reached.
O When internal PJ power circuit is failed.
O When internal PJ temperature is too high.
[2]––––––––––––––––––––––––––––––––––
O When PJ is turned into Standby in proper user
operation.
O When lamp Corres. Value reaches
[ ] hours.
O When Power management function turns PJ
lamp off.
[3]––––––––––––––––––––––––––––––––––
O When the signal is interrupted.
O When Auto Play is failed.
O When accumulated filter use time
reaches [ ] hours.
SNMP setting