Sanyo PLC-WXU30, Owner'S Manual, Page: 155 / 270

73
English
Item Description
Factory default................ Sets all of the projector control items to the factory
default setting except the following items.
Lamp Corres. Value, PJ time, Filter time.
P-TIMER .....................Switches the P-TIMER display.
ON .......... Starts P-TIMER indication
STOP...... Stops P-TIMER counting
OFF ........ Stops P-TIMER indication
Item Description
Lamp counter .........Displays the lamp use time (Corresponding value) .
Reset the time after lamp replaced.
Lamp counter resetting
1. Select a Lamp radio button and then click Reset button.
2. Click
OK
button to execute the reset.
Filter counter...........Displays the filter use time. Reset the time after filter
replaced.
Filter warning..........Sets the time to indicate the filter replacement message
on the screen.
Item Description
Key lock.....................Sets the prohibition of controls either Projector or
Remote control.
Fan ..............................Sets the cooling options after turning off.
L1 Normal cooling
L2 Silent cooling
Fan control..............Sets the fan control speed.
Status .................Indicates the current fan mode.
Setting up the projector