manualshive.com logo in svg

Sanyo PLC-WXU30, Owner'S Manual, Page: 27 / 270

Share
Download
Sanyo PLC-WXU30 Owner'S Manual Download Page 27

27

Sound Adjustment

1

2

Press the MENU button to display the On-Screen 
Menu. Use the Point 

 

 buttons to move the red 

frame pointer to the Sound Menu icon.

Press the /– buttons on the top control or on the 
remote control to adjust the volume. The volume dialog box 
appears on the screen for a few seconds.

Press the MUTE button on the remote control to temporarily 
turn off the sound. To turn the sound back on, press the 
MUTE button again or press the /– buttons. The 
Mute function is also effective for the AUDIO OUT jack.

Press the Point 

 

 buttons to switch the mute function On/

Off. When the sound is turned off, “On” is displayed. Press 
the Point 

 

 buttons again to turn the sound back on.

Use the Point 

! 

 buttons to move the red frame 

pointer to the desired item, and then press the SELECT 
button.

Volume

Volume

Mute

Press the Point 

 

 button to turn up the volume; press the

Point

 button to turn down the volume.

Mute

Direct Operation

Menu Operation

Approximate level of the volume.

Exit the Sound Menu.

Approximate level 
of the volume.

Press the MUTE button to set the Mute function On 
or Off. The dialog box disappears after 4 seconds.

Sound Menu

Sound Menu icon

Volume Dialog Box

Remote Control

VOL+ button

VOL- button

MUTE button

Top Control

/- 
buttons

Basic Operation

Summary of Contents for PLC-WXU30















































































































































































































































































Reviews:

No comments