Sanyo PLC-WXE45 Owner'S Manual Download

Page: 64 / 71

Indicators

Projector Condition

POWER

red/�reen

WARNING

red

LAMP

REPLACE

yellow

The projector is off. (The AC power cord is unplugged.)

The projector is preparing for stand-by or the projection lamp is

being cooled down. The projector cannot be turned on until cooling is

completed.

The projector is ready to be turned on with the POWER ON/STAND-BY

button.

The projector is operating normally.

The projector is in the Power management mode.

The temperature inside the projector is abnormally high. The projector

cannot be turned on. When the projector is cooled down enough and

the temperature returns to normal, the POWER indicator lights red

and the projector can be turned on. (The WARNING indicator keeps

blinking.) Check and clean the air filters.

The projector has been cooled down enough and the temperature

returns to normal. When turning on the projector, the WARNING

indicator stops blinking. Check and clean the air filters.

The projector detects an abnormal condition and cannot be turned on.

Unplug the AC power cord and plug it again to turn on the projector. If

the projector is turned off again, unplug the AC power cord and contact

the dealer or the service center for service and checkup. Do not leave

the projector on. It may cause an electric shock or a fire hazard.

Check the indicators for projector condition.

• • • green.

• • • red

• • • off

• • • blinks green.



When the projection lamp reaches the end of its life, the LAMP REPLACE indicator lights yellow.

When this indicator lights yellow, replace the projection lamp with a new one promptly. Reset the lamp

replacement counter after replacing the lamp. See pages 57-58.

Indicators and Projector Condition

• • • blinks red.



Appendix

Summary of Contents for PLC-WXE45








































































Search results

Summary of Contents for PLC-WXE45

Reviews:

Related manuals for PLC-WXE45

Brands by name

Popular brands

Sanyo PLC-WXE45, Owner'S Manual

Search results

Summary of Contents for PLC-WXE45

Reviews:

Related manuals for PLC-WXE45

Brands by name

Popular brands