Sanyo PLC-WXE45 Owner'S Manual Download

Page: 25 / 71

Select either Computer 1 or Computer 2 by pressing the

COMPUTER button on the remote control.

Before using COMPUTER button, select the correct input

source through Menu operation as described below.

Press the MENU button to display the On-Screen

Menu. Use the Point

◄►

buttons to move the red

frame pointer to the Input Menu icon.

Input Menu

Use the Point

▲▼

buttons to move the red arrow

pointer to either Computer 1 or Computer 2, and then

press the SELECT button.

After the Source Select Menu appeared for Computer

1, move the pointer to RGB and then press the

SELECT button.

Input Menu

COMPUTER button

Computer 1

Computer

Input Source Selection

Direct Operation

Menu Operation

Move the pointer (red arrow)

to Computer 1 and press the

SELECT button.

Input Menu icon

Move the pointer (red arrow)

to Computer 2 and press the

SELECT button.

Move the pointer to RGB

and press the SELECT

button.

Source Select Menu

Remote Control

COMPUTER button



Note:

• Computer 2 is not displayed when the COMPUTER IN 2/

MONITOR OUT terminal is set as Monitor out (p.44).

• Computer 2 (COMPUTER IN 2/MONITOR OUT) can

accept only the RGB signal.

• When the Input Search function is set On1 or On2, the

input signal will be searched automatically (p.44)

Computer

*See Notes at the bottom of this page.

Computer Input

Summary of Contents for PLC-WXE45








































































Search results

Summary of Contents for PLC-WXE45

Reviews:

Related manuals for PLC-WXE45

Brands by name

Popular brands

Sanyo PLC-WXE45, Owner'S Manual

Search results

Summary of Contents for PLC-WXE45

Reviews:

Related manuals for PLC-WXE45

Brands by name

Popular brands