PLC-HF15000L Expand Serial Command Functional Specifications
45/105
8.9.8 CF_PIPMAININP Command
Command
“CF_PIPMAININP_%1_%2” [CR]
%1
“1” -------------------- Select Input 1
“2” -------------------- Select Input 2
“3” -------------------- Select Input 3
“4” -------------------- Select Input 4
%2
“DIGITAL” ---------------- Select DVI Input
“ANALOG” --------------- Select Analog Input
“VIDEO” ------------------- Select Composite Video Input
“S-VIDEO” ---------------- Select S-Video input
“YPBPR” ------------------ Select Y, Pb/Cb, Pr/Cr Input
“YCBCR” ------------------ Select Y, Pb/Cb, Pr/Cr Input
“SDI1” --------------------- Select SDI 1 Input
“SDI2” --------------------- Select SDI 2 Input
“SCART” ------------------ Select SCART Input
“HDCP” -------------------- Select HDCP Input
“HDMI” -------------------- Select HDMI Input
“LINKA-YCBCR” -------- Select LINK-A(YCBCR1) Input
“LINKB-YCBCR” -------- Select LINK-B(YCBCR1)Input
“DUAL-YCBCR1” --------- Select DUAL(YCBCR1)Input
“DUAL-YCBCR2” -------- Select DUAL(YCBCR2)Input
“DUAL-YCBCR3” -------- Select DUAL(YCBCR3)Input
“DUAL-YCBCR4” -------- Select DUAL(YCBCR4)Input
“DUAL-RGB1” -------- Select DUAL(RGB1)Input
“DUAL-RGB2” -------- Select DUAL(RGB2)Input
Details
Select input and source of Main picture of “Picture in Picture”. (Valid only when in
the normal Power ON status.)
*
In the case of a specific status, return Error Code “101” [CR] and the command is
not executed.
- When selected Source does not meet the requirement for Input.
- When selected Input3 / Input4 without Board in Input3 or Input4
- When selected Input / Source is invalid in “Picture in Picture” mode.
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.9.9 CF_PIPSUBINPU Command
Command
“CF_PIPSUBINP_%1_%2” [CR]
%1
“1” -------------------- Select Input 1
“2” -------------------- Select Input 2
“3” -------------------- Select Input 3
“4” -------------------- Select Input 4
%2
“DIGITAL” ---------------- Select DVI Input
“ANALOG” --------------- Select Analog Input
“VIDEO” ------------------- Select Composite Video Input
“S-VIDEO” ---------------- Select S-Video input
“YPBPR” ------------------ Select Y, Pb/Cb, Pr/Cr Input
“YCBCR” ------------------ Select Y, Pb/Cb, Pr/Cr Input
“SDI1” --------------------- Select SDI 1 Input
“SDI2” --------------------- Select SDI 2 Input
“SCART” ------------------ Select SCART Input
“HDCP” -------------------- Select HDCP Input
“HDMI” -------------------- Select HDMI Input
“LINKA-YCBCR” -------- Select LINK-A(YCBCR1) Input
“LINKB-YCBCR” -------- Select LINK-B(YCBCR1)Input
“DUAL-YCBCR1” --------- Select DUAL(YCBCR1)Input
“DUAL-YCBCR2” -------- Select DUAL(YCBCR2)Input
“DUAL-YCBCR3” -------- Select DUAL(YCBCR3)Input
“DUAL-YCBCR4” -------- Select DUAL(YCBCR4)Input
“DUAL-RGB1” -------- Select DUAL(RGB1)Input
“DUAL-RGB2” -------- Select DUAL(RGB2)Input
