PLC-HF15000L Expand Serial Command Functional Specifications
46/105
Details
Select input and source of Sub picture of “Picture in Picture”. (Valid only when in
the normal Power ON status.)
*
In the case of a specific status, return Error Code “101” [CR] and the command is
not executed.
- When selected Source does not meet the requirement for Input.
- When selected Input3 / Input4 without Board in Input3 or Input4
- When selected Input / Source is invalid in “Picture in Picture” mode.
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.9.10 CF_PIPSIZE Command
Command
“CF_PIPSIZE_%1_%2” [CR]
%1
“1” -------------------- Set main picture size to 10%
“2” -------------------- Set main picture size to 20%
“3” -------------------- Set main picture size to 30%
“4” -------------------- Set main picture size to 40%
“5” -------------------- Set main picture size to 50%
“6” -------------------- Set main picture size to 60%
“7” -------------------- Set main picture size to 70%
“8” -------------------- Set main picture size to 80%
“9” -------------------- Set main picture size to 90%
“10” ------------------ Set main picture size to 100%
%2
“1” -------------------- Set sub picture size to 10%
“2” -------------------- Set sub picture size to 20%
“3” -------------------- Set sub picture size to 30%
“4” -------------------- Set sub picture size to 40%
“5” -------------------- Set sub picture size to 50%
Details
Set display size of “Picture in Picture”.
(Valid only when in the normal Power ON status.)
*When “Picture in Picture” is set to Off, return “101” [CR]
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.9.11 CF_PIPSIZEMAIN Command
Command
“CF_PIPSIZEMAIN _%1” [CR]
%1
“UP” --------------------- Increment setting value of Main picture size.
“DN” --------------------- Decrement setting value of Main picture size.
Details
Set the size of Main picture for “Picture in Picture”.
(Available only in the normal Power ON status)
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
8.9.12 CF_PIPSIZESUB Command
Command
“CF_PIPSIZESUB _%1” [CR]
%1
“UP” --------------------- Increment setting value of Sub picture size.
“DN” --------------------- Decrement setting value of Sub picture size.
Details
Set the size of Sub picture for “Picture in Picture”.
(Available only in the normal Power ON status)
Acceptable
“000” [CR]
Response
Unacceptable
“Error Code” [CR]
