PLC-ET30L Expand Serial Command Functional Specifications
35/62
8.10.15 CF_KEYDIS Command
Command
“CF_KEYDIS_%1” [CR]
%1
“NONE” ---------------------- RC & Projector keys are valid (All are valid)
“RCFULL” ------------------- All RC keys are invalid
“RCPART” ------------------- Specific RC keys are invalid
“KEYFULL” ------------------ All projector keys are invalid
“KEYPART” ------------------ Specific projector keys are invalid
Details
Set a ban on the use of RC keys/ projector keys
(Available only in the normal Power ON status)
Response
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.10.16 CF_FDEFAULT Command
Command “CF_FDEFAULT_%1” [CR]
%1
“RST”
Details
Reset to Factory Default setting
(Available only in the normal Power ON status)
Response
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.10.17 CF_PJPINCODE Command
Command
“CF_PJPINCODE_%1” [CR]
%1
“0000 – 9999” ------------- Directly specify PJ PIN code
Details
Enter PIN code to cancel PIN code lock (Available only in the normal Power ON
status)
PIN code can not be changed. (Only PIN code lock is canceled.)
*When PIN code Lock is enabled:
PIN code is matched ------------------------- Command is valid (Acceptable)
PIN code is mismatched -------------------- Command is invalid (Error code “102”)
PIN code is beyond %1 available range ------------ Command is invalid (Error
code “?”)
When PIN code lock is canceled:
PIN code is within %1 range ----------- Command is valid (Acceptable)
PIN code is out of %1 range ----------- Command is invalid (Error code is 102)
This command is only valid when “PJ PIN code” dialog is displayed to enter PIN
code after Power is ON and Countdown is completed.
When PIN code lock is set to “On1”, it needs to send this command every time
the projector is turned on.
Response
Acceptable
“000” [CR]
Unacceptable “Error Code” [CR]
8.10.18 CF_TESTPAT Command
Command
“CF_TESTPAT_%1” [CR]
%1
“COLOR” ---------------------- Display Color bar
“GRAD1” ---------------------- Display 16step(white
→
black)
“GRAD2” ---------------------- Display 16step(white
←
black)
“GRAD3” ---------------------- Display 16step(white
↓
black)
“GRAD4” ---------------------- Display 16step(white
↑
black)
“WHITE” ---------------------- Display all white
“BALCK” ---------------------- Display all black
“CROSS” --------------------- Display Cross
“OFF” --------------------------Do not show test pattern diplay
“UP” --------------------------- Switch forward
“DN” ---------------------- Switch backward
