Sanyo PJ-Net Organizer plus IIC, Owner'S Manual

Page: 46 / 124

Chapter 4 Controlling the Projector
Power control and status check
Click
Power & Status
on the main menu. The control page will be dis-
played.
By clicking ON or Standby button on the page, the power of the projector can be con-
trolled.
Item Description
PJ status
Power ......................... Displays the status of the lamp. (ON, OFF, On starting up, On cooling down)
Status .......................... Displays the status of the projector's power. (Refer to next page.)
Power control
........ Controls the projector power by clicking the "ON" or "Standby" button.
PJ temp.
Inside temp.A ........ Displays the surrounding temperature of lamp in the projector. (Sensor A)
Inside temp.B ........Displays the surrounding temperature of panel in the projector. (Sensor B)
External temp.
......Displays the surrounding temperature of the intake vent. (Sensor C)
......... The warning icon will appear if the temperature exceeds a specified value.
Check if there is no object to obstruct the airflow around the intake or exhaust
vent. It might be airfilter clogged. Clean up the airfilter.
* The temperature unit can be set either Centigrade or Fahrenheit in item "Initial
setting". (
+
p.34)
Popup confirmation window
Confirmation window
as shown in the below
appears when the
Standby
button is pressed.