Sanyo PJ-Net Organizer plus IIC Owner'S Manual Download Page 26

Page: 26 / 124

Chapter 2 Installation

Installed software

The following 3 software are installed on your computer.

●

Network Capture 3:

Capture the displayed image of the computer and serve it to the projector via the net-
work.
This software is registered into "startup folder" of the computer and the capture icon
stays on the task bar after booting the computer.

●

Network Viewer 3 (File Converter 1):

Converts to the JPEG*

data format which can be projected with the projector from the

JPEG, bitmap and Power Point files.

●

Network Viewer 3 (Program Editor) :

This is a tool to make the program which has a function to specify and order the pro-
jecting JPEG image data stored in the file servers.

* To uninstall these software, use "Add/Remove Program" from the control panel.

*1 This product supports the JPEG image format. This file is needed to convert to the optimized JPEG

file by using the File Converter 1 software previously. Refer to the item "Creating the available data

[Network Viewer 3]"(

p.88) about data converting for the projection.

Summary of Contents for PJ-Net Organizer plus IIC





























































































































Search results

Summary of Contents for PJ-Net Organizer plus IIC

Reviews:

Related manuals for PJ-Net Organizer plus IIC

Brands by name

Popular brands

Sanyo PJ-Net Organizer plus IIC, Owner'S Manual

Search results

Summary of Contents for PJ-Net Organizer plus IIC

Reviews:

Related manuals for PJ-Net Organizer plus IIC

Brands by name

Popular brands