37
Remaining battery power
You can check the remaining battery power from the screen. When
appears, recharge the battery as soon as possible.
• When the battery is low, “LOW BATTERY PLS CHARGE THE
BATTERY” appears and then the screen goes off.
• When the battery is low, if the “BEEP SOUND“ setting is set to “ON”,
you can hear a beep sound.
• Depending on the ambient temperature and usage, the battery duration
may change. Therefore, take the battery indicator as a rough guide.
• When there is almost no battery, if you turn off the power and then back on, the
battery amount displayed may be more than the actual amount. In this case, if you
perform recording or timer recording, the unit may stop middle of the operation and
the power may turn off.
•
Dispose a used battery in accordance with your local regulations.
Resume function
The resume function remembers the operation mode, file used, and playback position before
the power was turned off last time. When you turn on the power again, the unit resumes with
these settings. However, the resume function does not work in the following cases.
- If you switch the folder
- If the unit is connected to your PC
- If you remove the battery or a microSD card without turning off the power first
- If you insert a microSD card after the power is turned on
Battery power
Small
Large
Battery power
Small
Large
Summary of Contents for ICR-XPS01M - Xacti Digital Sound Recorder
Page 182: ...SANYO Electric Co Ltd ...
