27
2.2.4 HDMI
If you are using HDMI output you can select one of SD Progressive, 720P, 1080I options. “Off” option
disables HDMI output.
In order to choose one of HDMI options press HDMI button on the remote control while the HDMI cable is
plugged. Each press of HDMI key will change option.
While HDMI option is ON, only progressive video can be get from SCART output of recorder. Therefore If
your TV does not support progressive mode, scrambled video may be received from SCART output. Please
change SPDIF Output and downmix settings if you do not get a good video or sound.
NOTE
: When HDMI cable is unplugged during playback, Power off/on may be needed
NOTE
: The video may not be displayed properly in 1080i mode If your TV can not support this mode.
NOTE
: The preselected resolution quality will be activated when you replug the HDMI cable.
2.2.5 SCREENSAVER
This menu option allows user to activate screensaver while the unit is not in use for a while.
2.3 AUDIO
2.3.1 DOWNMIX
Downmix means mixing 5.1 channels down to two channels.
Stereo:
Two channels stereo. Use this option if you have a
stereo TV or a HI-FI stereo system.
Surround:
Surround encoded output.
2.3.2 S-PDIF OUTPUT
This item can be selected as “RAW” or “LPCM”. For 5.1
channels digital output, this item should be selected as
RAW. Set these options to agree with the speakers installed in your home entertainment system.
2.3.3 LPCM OUTPUT
This item can be selected as “LPCM 96K” or “LPCM 48K”.
Choose “LPCM 96K” if your AV amplifier/receiver is compatible with 96K sampling rate audio, otherwise
leave it set to “LPCM 48K”.
2.3.4 DYNAMIC RANGE
Dynamic range adjusts frequency response. This control is useful to turn down the level of loud passages
(explosions, car crashes, and etc.), while at the same time keeping soft passages loud enough to hear them
clearly.
Full:
The range between loudest and softest is compressed to the maximum.
Off:
There is no compression. You can adjust the level of the dynamic range compression to different levels
between off and full. The other settings are expressed as a fraction of the full dynamic range.
2.4 LANGUAGE
2.4.1 AUDIO LANGUAGE
You can select default audio language by this option. The
selected audio language will be activated, if supported by
the disc played.
