Sanyo DSR - 300 Instruction Manual Download Page 53

Page: 53 / 136

English

SE
TTIN

GS <MAIN

MENU 1>

VIDEO INPUT SET

This section describes the settings to be made when using
this unit in combination with a multiplexer (sold separately)
and the settings for video input (analog).

Press the [MENU] button.

The <MAIN MENU 1> screen appears.

Select “2. VIDEO INPUT SET”, and press
the [ ] button.

The <VIDEO INPUT SET> screen is displayed, with the
cursor positioned on “MULTIPLEXER”.

Press the [ ] button.

“NO USE” flashes.

Press the [

] or [

] button to select

the multiplexer to be used.

[Settings] (

indicates default setting.)

Press the [EXIT/OSD] button.

The display returns to the normal screen.

When this unit is to be used with a multiplexer, connect
its switch output terminal to the multiplexer’s switch
input.

[MENU] button

[

] button

[

] button

[

] button

[

] button

[EXIT/OSD] button

Settings for multiplexer connection

Setting

Description

NO USE

No multiplexer will be used.

SANYO

A Sanyo multiplexer will be used.

OTHERS1

A Sony multiplexer will be used.

OTHERS2

A Robot or DM multiplexer will be used.

OTHERS3

Other multiplexers

e00_l8had_us_7.book Page 52 Wednesday, March 10, 2004 2:47 PM

Summary of Contents for DSR - 300









































































































































Search results

Summary of Contents for DSR - 300

Reviews:

Related manuals for DSR - 300

Brands by name

Popular brands

Sanyo DSR - 300, Instruction Manual

Search results

Summary of Contents for DSR - 300

Reviews:

Related manuals for DSR - 300

Brands by name

Popular brands