Sanyo DSR - 300 Instruction Manual Download Page 27

Page: 27 / 136

English

OPERATION

NORMAL RECORDING/TIMER RECORDING PLAYBACK

Follow the procedures below to playback images stored in the normal recording area (by normal recording or timer recording).

Press the [PLAY/STOP] button.

The PLAY/STOP indicator lights, and “ ” appears in the
operation display area. The images stored in the normal
recording area are played back.

Image playback starts from the point at which recording
started.

If “OVERWRITE” has been set in the normal recording
settings, playback starts with the oldest recorded image
when the recording is played back for the first time.

When playback ends, the digital video recorder pauses
automatically.

While stopped, “ ” is displayed in the operation display
area.

After playback is stopped, it will resume from the
stopped point the next time it is started.

Press the [PLAY/STOP] button.

Playback ends.

Playing back an image near the point of
recording

The digital video recorder prioritizes recording
operations, so the playback image may pause
temporarily.

During playback, press the [ ] or [ ] button.

When you press the [ ] button, “

” appears in the

operation display, and the playback fast-forwards.
When you press the [ ] button, “

” appears in the

operation display, and the playback fast-rewinds.

Press the [

] or [

] button while fast-forward/

rewind.

The speed changes by one increment/decrement each
time you press the button.

Press the [PLAY/STOP] button.

Playback ends and live image is displayed.

Normal recording area

[PLAY/STOP] button

[ ] button

[

] button

[

] button

[ ] button

Playback

Ending playback

Operation

display

10- 05- 03 ALARM 0001

10: 50: 00 EN 0. 12SEC

05- 10- 04 ALARM 0001

10: 50: 00 EN

10FPS

Fast-forward playback/fast-rewind
playback

To change the fast-forward playback/fast-
rewind playback speed

Ending fast-forward playback/fast-rewind
playback

Fast-forward

playback

symbol

e00_l8had_us_7.book Page 26 Wednesday, March 10, 2004 2:47 PM

Summary of Contents for DSR - 300









































































































































Search results

Summary of Contents for DSR - 300

Reviews:

Related manuals for DSR - 300

Brands by name

Popular brands

Sanyo DSR - 300, Instruction Manual

Search results

Summary of Contents for DSR - 300

Reviews:

Related manuals for DSR - 300

Brands by name

Popular brands