- 2 -
DVD MECHANISM REPLACEMENT
1. Cautionary instructions in handling the assy
(Safety instructions)
Optical pickup
The laser beam used in the pickup is classified as "class 2". Exposing
your eyes or skin to the beam is harmful. Take care not to do so.
(Caution against static electricity and leakage voltage)
Ground securely the work tables, tools, fixtures, soldering irons
(including those made of ceramic) and measuring instruments used
in the production lines and inspection departments that handle
loaders. The workers shall also be grounded.
(Cautionary instructions in handling)
Do not touch the object lens when handling a loader, or the lens
will be stained, resulting in inadequate playability.
There is no power supply protection circuit provided for this product
or adjustment/inspection device. Short-circuiting may lead to fire or
damage.
Take care so as to protect from exposure to water, the entry of
metallic pieces or dew condensation.
In particular, a strong magnet adjacent to the pickup will not only
get inoperative but can damage the pickup if a small metallic piece,
such as a screw or swarm, enters.
The loader edge can cause injury if inadvertently handled.
Do not touch a rotating disk, or injury may result.
This product is a precision device. Handle carefully.
A shock or dropping will cause misalignment or destruction. If it
should occur, refer to clause 2.
This product is so designed as to endure an initial shock equivalent
to a drop from a height of approx. 90 cm under the packed condition.
After the initial shock, the resistivity will still remain at a level of 50
to 60 G, but the mechanical robustness
The entry and deposition of dirt into or on the pickup lens or moving
section will cause malfunction or degradation.
(Connectors)
Do not connect or disconnect while power is on.
Connecting or disconnecting signal wires or the main power cord
when the power is on may destruct the unit or fixture.
When connecting, push all the way in securely.
An insufficient insertion may cause a bad contact, leading to an
erroneous operation.
Do not connect or disconnect roughly by an excessively strong force,
or a broken wire or bad contact may result.
Semiconductors are connected. Do not touch connector terminals
directly.
If the worker is grounded, there is nothing to worry about static
electricity, but the rust on the connector terminal surface caused
by the touch may result in bad contact.
(Power source)
The power source need be good in quality (free from instantaneous
interruptions or noises).
A low quality power source may well cause malfunction.
(Storage)
Do not place or store in a dusty place or a place where dew
condensation is possible.
The entry and deposition of dirt or dust into or on the pickup lens or
moving section will cause malfunction or degradation.
Also, dew condensation causes rust ; the rust penetrate into the
precision part of a pickup, causing malfunction, or degrading the
optical quality of the internal lens and reflector, which also leads to
malfunction.
LASER BEAM SAFETY PRECAUTION
UK,XE,SS,AU
UK
VIDEO 1
ANT
FM
(75
Ω
)
AM
LOOP
R
L
VIDEO IN
AUDIO IN
VIDEO
S-VIDEO
(DVD ONLY)
MONITOR OUT
R
L
CENTER
FRONT
R
L SUB WOOFER
SURROUND
SPEAKERS 8
Ω
VIDEO OUT SELECT
(DVD ONLY)
S-VIDEO
RGB
NTSC
PAL
TV SYSTEM
A/V EURO CONNECTOR
(MONITOR OUT)
VIDEO 2 (IN)
C
R
C
B
Y
COMPONENT
VIDEO OUT
R
L
VIDEO 2
VIDEO 1
ANT
FM
75
Ω
AM
LOOP
VIDEO IN
AUDIO IN
R
L
VIDEO IN
AUDIO IN
VIDEO OUT
AUDIO OUT
VIDEO
S-VIDEO
(DVD ONLY)
MONITOR OUT
R
L
CENTER
FRONT
R
L SUB WOOFER
SURROUND
SPEAKERS 8
Ω
VIDEO OUT SELECT
(DVD ONLY)
S-VIDEO
COMPONENT
NTSC
PAL
TV SYSTEM
VOLTAGE SELECTOR
SUB
SUB
MAIN
MAIN
220-240V
110-120V
SS
VIDEO 1
ANT
FM
(75
Ω
)
AM
LOOP
R
L
VIDEO IN
AUDIO IN
VIDEO
S-VIDEO
(DVD ONLY)
MONITOR OUT
R
L
CENTER
FRONT
R
L SUB WOOFER
SURROUND
SPEAKERS 8
Ω
VIDEO OUT SELECT
(DVD ONLY)
S-VIDEO
RGB
NTSC
PAL
TV SYSTEM
A/V EURO CONNECTOR
(MONITOR OUT)
VIDEO 2 (IN)
XE
C
R
C
B
Y
COMPONENT
VIDEO OUT
R
L
VIDEO 2
VIDEO 1
ANT
FM
75
Ω
AM
LOOP
VIDEO IN
AUDIO IN
R
L
VIDEO IN
AUDIO IN
VIDEO OUT
AUDIO OUT
VIDEO
S-VIDEO
(DVD ONLY)
MONITOR OUT
R
L
CENTER
FRONT
R
L SUB WOOFER
SURROUND
SPEAKERS 8
Ω
VIDEO OUT SELECT
(DVD ONLY)
S-VIDEO
COMPONENT
NTSC
PAL
TV SYSTEM
CAUTION Ð INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.
ADVARSEL Ð USYNLIG LASER STR•LING VED •BNING, N•R
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION, UNDG• UDS
®TTELSE FOR STR•LING.
VARNING Ð OSYNLIG LASER STR•LNING N€R DENNA DEL €R …PPNAD
OCH SP€RR €R URKOPPLAD. STR•LEN €R FARLIG.
VORSICHT Ð UNSICHTBARE LASERSTRAHLUNG TRITT AUS, WENN
DECKEL GE…FFNET UND WENN SICHERHEITSVERRIEGELUNG
†BERBR†CKT IST. NICHT, DEM STRAHL AUSSETZEN.
VARO Ð AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET
ALTTIINAN€KYM€TT…M€LLE LASERS€TEILYLLE. €L€ KATSO
S€TEESEEN.
AU
Summary of Contents for AVD-8501
